IQAir 1BB.UA0.DGU Use and Care Manual download pdf (Page 16)

Chapter 4 – Using the Control Panel

4.4.5 Timer ON/OFF Fan Speed Selection Menu

The Timer ON/OFF Fan Speed Selection Menus allow the setting of two

different fan speeds for two different time periods (referred to as Timer ON

period and Timer OFF period). For the Timer ON period you can select fan

speeds 1 to 6. For the Timer OFF period you can select fan speeds 0 (OFF) to 6.

1. To reach the Timer ON Fan Speed Selection Menu from the main display

window, press the Menu key four times.

2. Press and hold the Enter key until the black cursor appears.

3. Press the  key to select the desired speed for the Timer ON period.

4. Press the Enter key to conrm the chosen speed and to exit the enter

mode.

5. To set the Timer OFF period fan speed, press the Menu key one more time.

Press and hold the Enter key until the black cursor appears and adjust the

Timer OFF fan speed as above. The nal Enter command saves the

selection and exits the enter mode.

4.4.4 Day-of-the-Week Timer

The Day-of-the-Week Timer allows the deactivation of the Timer ON period on

certain days of the week. In its default setting the Timer ON period is enabled

on all seven days of the week. This is indicated by stars below the abbreviations

of the days. On days without a star the air cleaner will be running at the speed

which is set in the Timer OFF Speed Selection Menu (see 4.4.5).

Note: At least one day of the week must be enabled with a star to enable the

Auto Timer. If the timer is disabled on all days of the week, the timer status eld

in the Auto Timer Menu will switch to OFF and the timer will be disabled.

1. To reach the Weekly Timer Menu from the main display window, press the

Menu key three times.

2. Press and hold the Enter key until the cursor appears.

3. Press the  key to activate (star) or deactivate (no star) the Timer ON period

on a particular day. Press the Enter key to proceed to the next day.

4. Repeat the same procedure until the timer has been activated/deac ti va ted

on the desired days. The nal Enter command exits the enter mode.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

IQAir 1BB.UA0.DGU Use and Care Manual Page 16